Nukit on da block how to#
Nukit on da block android#
Nukit on da block download#

Nukit on da block how to#

This saves you the nagging question of “Is my door really locked? How to install the Nuki Door Sensor? You can also set your door to lock automatically when it is closed. In combination with all Nuki Smart Locks of the 3rd generation you can always check in the app if your door is securely closed.Īdditionally, you can get notified if your door stands open for a certain time period. To prevent this, it is important to display not only the status of the Smart Lock (unlocked – locked) but also the status of the door (open – closed). Theoretically, the locking cylinder could also be locked while your door is still open. When the Smart Lock locks or unlocks your door, strictly speaking only the locking cylinder of your door is operated. With this door sensor you can always have a look on the status of your door via the Nuki app. With the Nuki Smart Lock 3.0 we also launched the external Nuki Door Sensor. How is the door sensor installed and used?

If something is unclear, find out more in our Support area or contact our customer support team.

You will be guided step by step through the setup in the app. You can then search for a new Smart Lock in the Nuki app on your smartphone, name it and start using it right away. You will know this mode is active because the entire light ring remains lit. This will put the Smart Lock into “pairing mode” (pairing only takes place within the Nuki app). To pair the Nuki Smart Lock with your smartphone, press and hold the large button on the top of the Smart Lock for a few seconds. Simply follow the step-by-step instructions in the Nuki app, which will guide you through all the steps of the installation and setup process.

Nukit on da block android#

Operating system: from iOS 11.4 (iPhone 5S or newer) or Android 5.0 or newer.Your smartphone must meet the following requirements:

Nukit on da block download#

Once you’ve installed your Nuki Smart Lock on the door, it’s time to download the free Nuki app from the Google Play Store, the Apple App Store or from the Huawei App Gallery. Pairing the Nuki Smart Lock with the Nuki app on your smartphone > Both installation variants can be completely removed from your door without leaving a trace, making them also ideal for rented flats.

Now peel off the protective film from the plate and stick it to the door.

First clean the fitting around the lock cylinder on the inside of your door with a alcohol-based substance (e.g.

If your locking cylinder protrudes less than 3 mm, you can attach the Nuki Smart Lock with the adhesive plate (mounting plate B). After that you insert the battery compartment or the Nuki Power Pack on the bottom side and your electronic door lock is ready to use.

By applying light pressure, your Smart Lock should audibly click into place.

Now place the Nuki Smart Lock on the mounting plate, making sure to first insert the key head into the long slot in the round upper part on the back of the Smart Lock.

> Carefully fix the set screws in place, without applying too much force so as not to damage the lock cylinder.

Place the screw-fixed plate over your door lock (on the inside of the door!) and tighten the three screws with the Allen key provided.

If it protrudes more than 3mm from your door, you need the screw-fixed plate (mounting plate A). Which plate fits on your door depends on how far your cylinder protrudes. Two high-quality, glass-fibre reinforced mounting plates are included in the package, of which you only need one for the installation. There are two installation options, depending on the type of door lock you have: Mounting with a screw-fixed plate or an adhesive plate? The Nuki Smart Lock is mounted on your door from the inside above your existing cylinder and is ready to go in just three minutes.